
2SA1015 PNP Low Noise Audio Transistor
The 2SA1015 (commonly marked A1015) is an industry-standard general-purpose Silicon PNP Epitaxial Planar Transistor housed in a standard TO-92 through-hole package, widely utilized in low-frequency audio amplification, small-signal switching, and general electronic control circuits. Rated for a -50 V collector-emitter voltage (-50 V collector-base voltage) and -150 mA continuous collector current with 400 mW total power dissipation, it delivers low audio noise (1.0 dB typ. at 1 kHz), low collector-emitter saturation voltage (-0.1 V typ. at -100 mA), and an 80 MHz minimum transition frequency. Sorted into standardized hFE gain classifications (O, Y, GR), it pairs seamlessly with its NPN complement, the 2SC1815, across audio preamplifiers, logic interfaces, and power supply control circuits.
Key Features:
- Versatile Small-Signal Ratings: Supports -50 V collector-emitter voltage (Vceo), -50 V collector-base voltage (Vcbo), -150 mA continuous collector current (Ic), and 400 mW total power dissipation (Ta = 25°C).
- Low Audio Noise & Low Saturation Voltage: 1.0 dB typical noise figure (f = 1 kHz, Rg = 10 kΩ) and -0.1 V typical Vce(sat) (at Ic = -100 mA, Ib = -10 mA) ensure clean signal amplification and efficient switching.
- Standardized DC Current Gain Bins: Available in three standardized hFE selections — 2SA1015-O (70 to 140), 2SA1015-Y (120 to 240), and 2SA1015-GR (200 to 400) — for accurate circuit biasing.
- Complementary Pair Compatibility: Designed to pair directly with the ubiquitous NPN 2SC1815 in complementary push-pull driver stages, differential amplifiers, and active control circuits.
Typical Applications:
- Low-frequency audio preamplifiers, tone control stages, and headphone driver circuits (paired with 2SC1815)
- Small-signal switching, microcontroller level shifting, and relay/LED driver stages
- Linear voltage regulator error amplifiers, overcurrent protection, and mute control circuits
- Consumer electronics, audio mixers, guitar pedals, and industrial control boards
Technical Specifications:
- Part Number: 2SA1015 (Marking: A1015 | Available Grades: 2SA1015-O, 2SA1015-Y, 2SA1015-GR)
- Transistor Polarity: PNP (Bipolar Junction Transistor - BJT)
- Mounting Type: Through-Hole (THT)
- Package / Case: TO-92 (TO-226AA)
- Collector-Emitter Voltage (Vceo): -50 V
- Collector-Base Voltage (Vcbo): -50 V
- Emitter-Base Voltage (Vebo): -5.0 V
- Continuous Collector Current (Ic): -150 mA (-0.15 A)
- Continuous Base Current (Ib): -50 mA
- Total Power Dissipation (Pd @ Ta = 25°C): 400 mW (0.4 W)
- DC Current Gain (hFE @ Ic = -2.0mA, Vce = -6V): 70 to 400 (O: 70–140 | Y: 120–240 | GR: 200–400)
- Collector-Emitter Saturation Voltage (Vce(sat) @ Ic = -100mA, Ib = -10mA): -0.1 V (Typ.), -0.3 V (Max.)
- Base-Emitter On Voltage (Vbe(on) @ Ic = -100mA, Vce = -6V): -1.1 V (Max.)
- Transition Frequency (fT @ Ic = -1.0mA, Vce = -10V): 80 MHz (Min.)
- Collector Output Capacitance (Cob @ Vcb = -10V, Ie = 0, f = 1MHz): 4.0 pF (Typ.), 7.0 pF (Max.)
- Noise Figure (NF @ Ic = -0.1mA, Vce = -6V, Rg = 10kΩ, f = 1kHz): 1.0 dB (Typ.), 10 dB (Max.)
- Operating Junction Temperature (Tj): -55°C to +125°C




