
ACS712ELCTR-20A-T Hall Effect Current Sensor
The ACS712ELCTR-20A-T (commonly laser-marked ACS712T ELC-20A or 712ELC-20A; factory ordering code ACS712ELCTR-20A-T for tape-and-reel packaging) is a fully integrated, Hall-effect-based linear bidirectional current sensor IC housed in a compact SOIC-8 surface-mount package. Engineered for economical and precise AC or DC current sensing in industrial, commercial, and communications systems, it routes the applied current through an internal precision copper conduction path (1.2 mΩ typical resistance) located near the surface of the silicon die. The magnetic field generated by this current is converted by an integrated, low-offset linear Hall IC into a ratiometric analog output voltage proportional to the sensed current at 100 mV/A (centered at VCC × 0.5, or 2.5 V at 5.0 V supply), providing 2.1 kVRMS minimum galvanic isolation between the high-current conductor pins (Pins 1–4) and the low-voltage signal leads (Pins 5–8) without requiring optocouplers or costly isolation amplifiers.
Key Features:
- Bidirectional ±20 A AC/DC Current Sensing (100 mV/A Sensitivity): Measures both positive and negative currents up to ±20 A with a linear ratiometric analog output centered at VCC/2 (2.5 V quiescent output at 5.0 V supply) and 100 mV/A typical sensitivity.
- 2.1 kVRMS Integrated Galvanic Isolation: Internal copper conduction path provides 2.1 kVRMS minimum isolation voltage (354 V peak basic working isolation) between the sensed current path (Pins 1–4) and the sensor electronics (Pins 5–8).
- Ultra-Low 1.2 mΩ Internal Conductor Resistance: Minimizes power dissipation and insertion voltage drop across the current path, eliminating bulky external sense resistors and heat dissipation issues.
- 80 kHz Bandwidth & Factory-Trimmed Accuracy: Features an 80 kHz typical analog bandwidth (adjustable via external FILTER pin capacitor), ±1.5% typical total output error at 25°C, and a -40°C to +85°C industrial operating temperature range.
Typical Applications:
- Motor speed and load control (DC brushed/brushless motors, robotics drivers, and actuator protection)
- Switch-mode power supply (SMPS) overcurrent fault detection and load management
- Battery management systems (BMS), solar MPPT charge controllers, and inverter current monitoring
- Microcontroller AC/DC current measurement modules for Arduino, ESP32, STM32, and industrial PLCs
Technical Specifications:
- Part Number: ACS712ELCTR-20A-T (Base Part: ACS712-20A | SMD Marking: ACS712T ELC-20A / 712ELC-20A)
- Device Type: Fully Integrated Hall-Effect Linear Bidirectional Current Sensor IC
- Mounting Type: Surface Mount (SMD)
- Package / Case: SOIC-8 (SOIC8 Narrow Body, 150 mil)
- Supply Voltage Range (VCC): 4.5 V to 5.5 V DC (5.0 V Nominal)
- Optimized Primary Current Sensing Range (IP): -20 A to +20 A (Bidirectional AC or DC)
- Sensitivity (Sens @ IP = ±20A, VCC = 5.0V, Tamb = 25°C): 96 mV/A (Min.), 100 mV/A (Typ.), 104 mV/A (Max.)
- Zero-Current Output Voltage (VIOUT(Q) @ IP = 0A, VCC = 5.0V): VCC × 0.5 = 2.50 V (Typ., Ratiometric)
- Total Output Error (ETOT @ IP = ±20A, Tamb = 25°C): ±1.5% (Typ.)
- Primary Conductor Resistance (RPRIMARY): 1.2 mΩ (Typ.)
- Isolation Voltage (VISO @ 60s, UL 60950-1): 2,100 VRMS (2.1 kVRMS Min.)
- Working Voltage for Basic Isolation (VWFSI): 354 VDC / Vpk (250 VRMS)
- Analog Signal Bandwidth (f @ CF = 0nF): 80 kHz (Typ., Adjustable via FILTER Pin)
- Output Rise Time (tr @ Step IP, CF = 0nF): 3.5 µs (Typ.)
- Supply Current (ICC @ VCC = 5.0V, Output Open): 10 mA (Typ.), 13 mA (Max.)
- Nonlinearity (ELIN): ±1.5% (Typ.)
- Operating Ambient Temperature (Tamb): -40°C to +85°C (Extended Industrial E Grade)





