
- Stock: In Stock
- Brand: Texas Instruments
- Model: A0566.INA219AIDCNR
INA219AIDCNR Current and Power Monitor
The Original Texas Instruments INA219AIDCNR (commonly laser-marked B19 or 219A in SOT-23-8; factory ordering code INA219AIDCNR denoting tape-and-reel packaging of the A-grade variant) is a genuine zero-drift, bidirectional current-shunt and power monitor IC manufactured by Texas Instruments, housed in a compact SOT-23-8 (DCN) surface-mount package. Operating from a 3.0 V to 5.5 V DC supply while sensing common-mode bus voltages from 0 V to +26 V independently of the supply rail, it measures both shunt voltage drop and bus supply voltage using an integrated 12-bit Delta-Sigma ADC with programmable conversion times and averaging. Equipped with internal calibration registers and an integrated hardware multiplier, the INA219AIDCNR directly calculates current in amperes and power in watts over a 400 kHz / 2.56 MHz I2C / SMBus-compatible interface with 16 programmable slave addresses, eliminating the gain drift, offset error, and ADC inaccuracy common in counterfeit or remarked sensor chips.
Key Features:
- 0 V to +26 V Bus Sensing with Bidirectional Current Measurement: Monitors high-side or low-side shunt drops across a 0 V to +26 V common-mode bus range independent of the 3.0 V to 5.5 V supply voltage, supporting programmable full-scale shunt ranges of ±40 mV, ±80 mV, ±160 mV, or ±320 mV.
- High-Accuracy Zero-Drift Architecture (A-Grade): Delivers ±0.5% maximum gain error (0.1% typ.) and ±100 µV maximum input offset voltage (±10 µV typ.) across -40°C to +125°C for precise low-side and high-side current measurements.
- Integrated 12-Bit ADC & Direct Power Calculation: Features a 12-bit Delta-Sigma ADC (up to 128-sample hardware averaging) and internal calibration multiplier that outputs current (Amps) and power (Watts) directly via registers.
- I2C / SMBus Interface with 16 Programmable Addresses: Supports Fast-Mode I2C (up to 400 kHz) and High-Speed Mode (up to 2.56 MHz) with 16 selectable slave addresses (0x40 to 0x4F) via pins A0 and A1.
Typical Applications:
- Battery management systems (BMS), solar MPPT charge controllers, and Li-ion coulomb/power counters
- Precision DC power supply telemetry, electronic loads, and USB-C PD power monitors
- Robotics motor current sensing, server/telecom rail monitoring, and embedded energy loggers (Arduino, ESP32, STM32, Raspberry Pi)
- Industrial automation, automotive 12 V / 24 V diagnostics, and portable test instrumentation
Technical Specifications:
- Part Number: INA219AIDCNR (Original Texas Instruments | Base Part: INA219A | SMD Marking: B19 / 219A)
- Manufacturer: Texas Instruments (Genuine Original — A Accuracy Grade)
- Device Type: Bidirectional Current-Shunt and Power Monitor IC with I2C Interface
- Mounting Type: Surface Mount (SMD)
- Package / Case: SOT-23-8 (DCN / SOT-23-THIN, 8-Pin)
- Supply Voltage Range (Vs): 3.0 V to 5.5 V DC
- Common-Mode Bus Voltage Range (VCM): 0 V to +26 V DC (Independent of Vs)
- Differential Shunt Voltage Ranges (PGA Gains): ±40 mV (Gain /1), ±80 mV (Gain /2), ±160 mV (Gain /4), ±320 mV (Gain /8)
- ADC Resolution: 12-Bit Delta-Sigma ADC (9-Bit to 12-Bit Configurable, 1 to 128 Sample Averaging)
- Gain Error (A-Grade @ Tamb = 25°C): ±0.1% (Typ.), ±0.5% (Max.)
- Input Offset Voltage (Vos @ A-Grade, PGA = /1, Tamb = 25°C): ±10 µV (Typ.), ±100 µV (Max.)
- Offset Drift (dVos/dT): 0.1 µV/°C (Typ.)
- Common-Mode Rejection Ratio (CMRR @ VIN+ = 0V to 26V): 100 dB (Min.), 120 dB (Typ.)
- Quiescent Supply Current (Iq @ Normal Operation): 0.7 mA (Typ.), 1.0 mA (Max.)
- Power-Down Supply Current (Iq @ Power-Down Mode): 6.0 µA (Typ.), 15 µA (Max.)
- Communication Interface: I2C / SMBus Compatible (Up to 400 kHz Fast-Mode / 2.56 MHz High-Speed Mode | 16 Slave Addresses: 0x40–0x4F)
- Operating Ambient Temperature (Tamb): -40°C to +125°C





