Digital Voltmeter 0-100V Ammeter 10A -Case

The CaseDual LED Digital Ammeter and Voltmeter is a sophisticated device with a monochrome LED display in red and blue. It is designed to display voltage and current readings simultaneously. The panel meter is designed with a common ground, which means the measured ground wire and power supply ground share the same ground.

Features:

• Power Supply: Operates on a DC power supply ranging from 4.5-30V. It is equipped with reverse polarity protection, however, the maximum power supply should not exceed 30VDC.
• Module Supply Voltage: The module operates within a voltage range of DC 4.5-30V.
• Module Voltage Measuring Range: Capable of measuring voltage between 0-100V.
• Voltage Measurement Resolution: The minimum resolution for voltage measurements is 0.01V for measurements below 10V and 0.1V for measurements above 10V.
• Current Measurement: It can measure up to 10A forward current with a resolution of 0.01A.
• Operating Current: The device operates at less than 20mA.
• Display: The device features a 0.28" monochrome LED display in red and blue.
• Dimensions: The device measures 48 x 29 x 21 mm.
• Cut-out Size: The cut-out size is 45 x 26 mm.
• Measurement Rate: The device measures at a rate of 500mS/time or faster.
• Accuracy: The device has an accuracy of 1% (± 1 digit).
• Operating Conditions: The device can operate in temperatures ranging from -10°C to +65°C, humidity levels of 10% to 80% (non-condensing), and pressure levels of 80 to 106kPa.

Wiring Connection:

• COM: Black wire, chassis ground
• PW+: Red wire, power supply +, measured voltage +
• IN+: Yellow wire, measure current input. If only using the voltmeter function, please connect the yellow wire and black wire together to prevent interference.

Package Contents:

 1 x Digital Voltmeter 0-100V Ammeter 10A -Case